Welcome to the Traxxas Store where you can find thousands of choices in Traxxas cars and trucks such as the Summit, the Slash, the Stampede, Traxxas Quadcopters and Helicopters, even Racing Boats plus thousands of choices in Traxxas accessories.
∇ Use Search Below to find what you need. We have more than 17,000 items in our catalog.

Unbranded* 3678 Wheelie Bar Assembly 2WD Slash, Stampede, Rustler, Bandi

Unbranded* 3678 Wheelie Bar Assembly 2WD Slash - Stampede - Rustler - Bandit XL-5 VXL
● This is the Traxxas Wheelie Bar for the electric Slash 2WD, electric Stampede 2WD, electric Rustler, and Bandit vehicles. The unique patent-pending Traxxas adjustable wheelie bar features four position adjustment, plus it quickly and easily installs onto the rear of any 2WD electric Slash, Rustler, Stampede, and Bandit. The wheelie bar mount is constructed of durable composite nylon and it offers an extra level of protection for the motor and transmission case. Existing wheelie bar accessories such as the aluminum wheelie bar wheels with rubber tires (part #5186, 5186A) or the separate rubber tires (part #5185) are also compatible for custom looks and increased performance.
$16.00 Show Detail

RPM Wide Front a-Arms for The Traxxas E-Rustler and Stampede 2WD Replace

RPM Wide Front a-Arms for The Traxxas E-Rustler and Stampede 2WD Replacement Parts - Green
You already know RPM A-Arms are the toughest molded A-Arms in the R/C industry (Gram for Gram, stronger than aluminum as well)! each RPM A-arm is molded from our trademark blend of nearly indestructible nylons and backed by our world-renowned limited Lifetime warranty against breakage. RPM durability combined with RPM affordability; there’s no way you can go wrong! Tech notes: RPM wide A-Arms for the Traxxas Rustler and Stampede 2WD fit all electric versions of these models, although additional parts (not included) are required for completion as listed here: Rustler XL-5: 1 – RPM screw kit #70680, 1 – Traxxas #3643 (long camber links), 1 – Traxxas #3645 (long toe links) and 1 pair of front wheels (used to replace rear wheels). Stampede XL-5, Craniac and Skully: 1 – RPM screw kit #70680, 1 – Traxxas #3643 (long camber links), 1 – Traxxas #2338 (long toe links) and 1 pair of front wheels (used to replace rear wheels). Rustler VXL: 1 – Traxxas #3643 (long camber links), 1 – Traxxas #3645 (long toe links) and 1 pair of front wheels (used to replace rear wheels). Stampede VXL: 1 – Traxxas #2338 (long toe links) and 1 pair of front wheels (used to replace rear wheels).
$11.98 Show Detail

Traxxas 2431 Pinion Gear 31T 48P (2pc) 1/10 Slash 2WD Rustler Stampede B

Traxxas 2431 Pinion Gear 31T 48P (2pc) 1 10 Slash 2WD Rustler Stampede Bandit
Fits: Traxxas Rustler VXL/XL-5 / Stampede VXL/XL-5 / Bandit VXL/XL-5 / 1/10 Slash 2WD / 1/16 E-Revo VXL / 1/16 Slash VXL / 1/16 Summit VXL / 1/16 Rally VXL / 1/16 Ford Mustang Boss / 1/16 Kyle Busch Race Replica and Many More
$10.00 Show Detail

Hot Racing Steel Pinion and Spur Gear 18t 60t 32p, Red: Traxxas

Hot Racing Steel Pinion and Spur Gear 18t 60t 32p - Red: Traxxas
Hot Racing light weight hardened steel 18T/60T 32 pitch pinion and spur gear set for the Traxxas Bandit, Rustler, 2WD Slash, and 2WD StampedeFEATURES: - CNC machined and lightened hardened steel construction- Replaces stock nylon spur gear- Rugged 0.8 Module/32pitch teeth for total reliability on brushless power- Aluminum pinion sleeve to allow for either 1/8 inch or 5mm motor shafts- Black oxide coated gear for durability and corrosion resistance- Red anodized countersunk aluminum washers- High strength hardwareYOU WILL RECEIVE: - One (1) 18 tooth 32 pitch (0.8 Mod) pinion gear- One (1) 60 tooth 32 pitch (0.8 Mod) spur gear- Three (3) mounting screws- Three (3) red anodized countersunk washers- One (1) pinion adapter sleeve- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate)SPECIFICATIONS: - Number of Teeth: 18T/60T- Gear Pitch: 32 pitch (0.8 module)- Mounting Holes: 3- Tooth Face width: ~5mmCOMMENTS: - Consider using Hot Racing motor lock plate TE18L06 for secure motor mounting- Motor should no way exceed 180F. ESC should not exceed 160F. Excessive temperatures will shorten the life of the motor and ESC. description revised by: SN July 19, 2017
$25.47 Show Detail

Hot Racing STE1568E01 Hardened Polished Steel Hinge-Pin Slash/Rustler ,#

Hot Racing STE1568E01 Hardened Polished Steel Hinge-Pin Slash Rustler - #G14E6GE4R-GE 4-TEW6W215862
Hot Racing Hardened Centerless Grind Steel Hinge-pin KitFor the Electric Traxxas 2WD Slash, Rustler, Stampede, and Bandit 1/10 trucksand Nitro Slash. FEATURES: Hot Racing Polished Steel Lock-Nut Style Hinge-Pin Kitonce and for all. Centerless Grinding Machined from high-quality #45 carbonsteel, that is then heat treated for increase in durability, and thenpolished for ultra smoothness. Nylon insert lock-nut at each end ofthe hinge-pin prevents the pins from ever coming loose. This is agreat upgrade for your Traxxas 2WD Slash, Stampede, Rustler. YOU WILL RECEIVE: Two 52mm hinge pinsTwo 48mm hinge pinsTwo 35mm hinge pinsTwo 29mm hinge pinsSix M3 lock-nutsTwo M2.5 Lock-Nuts
$14.89 Show Detail

Hot Racing CSG1814 14t 48p Hardened Steel Pinion Gear 1/8 Bore

Hot Racing CSG1814 14t 48p Hardened Steel Pinion Gear 1 8 Bore
Black steel 48 Pitch 14 Tooth Pinion Gear. FEATURES: Standard 4140 steel and heat treatedheavy duty 3mm set screw for brushless powerYOU WILL RECEIVE: One 48 Pitch 14 Tooth Pinion Gear with 3mm set screwSPECIFICATIONS: Inner diameter: 1/8" (3mm)Length 9mmdescription revised by: WP April 1, 2014
$6.29 Show Detail

RPM Rear Bumper or Wheelie Bar Mount Electric 2WD Slash, Rustler, Stampe

RPM Rear Bumper or Wheelie Bar Mount Electric 2WD Slash - Rustler - Stampede - and Bandit - Blue
After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles using the stock wheelie bar mount. The problem – the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper/wheelie bar mount hanging under the chassis. The RPM solution An all-new bumper mounting system that eliminates all of the problems encountered with the stock version. The RPM rear bumper/wheelie bar mount has two mounting holes on the gear cover side and three on the motor side – that's two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate – ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance. Our rear bumper/wheelie bar mount fits a wide range of vehicles too. It fits all versions of the Traxxas Slash, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions. The RPM rear bumper/wheelie bar mount is molded in our nearly indestructible blend of nylons and is sold in either blue or black. Each mount comes with all necessary hardware, complete instructions for ease of installation and an industry-leading warranty to back it all up!
$8.86 Show Detail

Hot Racing STE250 Steel Spur Gear (50t 32p)(Orange) - Traxxas

Hot Racing STE250 Steel Spur Gear (50t 32p)(Orange) - Traxxas
Hot Racing light weight hardened steel 50 tooth, 32 pitch (0.8 Mod) spur gear for the 1/10 Traxxas Bandit, Rustler, 2WD Slash, 2WD Stampede, and Telluride vehiclesFEATURES: - CNC machined and lightened hardened steel construction- Replaces stock nylon spur gear- Rugged 0.8 Module/32pitch teeth for total reliability on brushless power- Black oxide coated gear for durability and corrosion resistance- Orange anodized countersunk aluminum washers- High strength hardwareYOU WILL RECEIVE: - One (1) 50 tooth 32 pitch (0.8 Mod) spur gear- Three (3) mounting screws- Three (3) orange anodized countersunk washers- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate)REQUIREMENTS: - Hardened .08 module (32 pitch) steel pinion gearSPECIFICATIONS: - Number of Teeth: 50- Gear Pitch: 32 pitch (0.8 module)- Mounting Holes: 3- Tooth Face width: ~5mmCOMMENTS: - Must use with .08 module (32 pitch) pinion gear - Consider using Hot Racing motor lock plate TE18L06 for secure motor mounting- Motor should no way exceed 180F. ESC should not exceed 160F. Excessive temperatures will shorten the life of the motor and ESC. description revised by: SN July 19, 2017
$19.89 Show Detail

Hot Racing CSG32X14 Short 32P Steel Pinion Gear 14T

Hot Racing CSG32X14 Short 32P Steel Pinion Gear 14T
Hot Racing brush-less black steel 32 pitch 14 tooth pinion gear. FEATURES: standard 4140 steel and heat treat heavy duty 4mm set screw for brush-less powerYOU WILL RECEIVE: one 32 pitch 14 tooth pinion gear with 4mm set screwSPECIFICATIONS: inner diameter: 1/8" (3.175mm)length 10.50 MMTooth width 5 mm
$7.89 Show Detail

Traxxas 3792 Transmission Gear Dust Cover Bandit Rustler Slash Stampede

Traxxas 3792 Transmission Gear Dust Cover Bandit Rustler Slash Stampede
Fits 1/10 Monster Jam Trucks ///Bandit VXL ///Bandit XL-5 ///Bigfoot ///Craniac ///Rustler VXL ///Rustler XL-5 ///Skully ///Slash 2WD ///Slash 2WD Ford Raptor ///Slash 2WD VXL ///Slash 2WD XL-5 ///Stampede VXL 2WD ///Stampede XL-5 2WD
$3.00 Show Detail
1 · 2 · 3 · 4 · 5 · 6 · 7 · 8 · 9 · 10 ·